AudioVox cruise control

This is the mounted cruise control switch.

The AudioVox kit includes a template for the switch. I added an 'ear' to go under the mirror arm to hold it in place. I made the bracket out of aluminum.

The rough bracket.

Test fit.

Because the switch will be outside it needs to be weatherproofed. Put a light coating of your favorite clear sealer on the inside cover.

Reassemble the switch and seal the back also.

The red wire is power and the gray wire is lighting for the switch. On a motorcycle this is normally the same so I connected the two wires.

The final touch is to cover the wires with ziploom.

I ran the wires into the headlight bucket where they connect with wires from the servo.





E-mail me